E 350 V8-5.4L (2008)
2. NOTE: Use new copper washers on the brake caliper flow bolt.
Remove the brake caliper flow bolt and position the brake hose aside.
^
Discard the copper washers.
^
To install, tighten to 40 Nm (30 lb-ft).
3. Remove the 2 brake caliper anchor plate bolts, the brake caliper and anchor plate as an assembly.
^
To install, tighten bolts to 225 Nm (166 lb-ft) using a butterfly torque adapter (such as Snap-On(R) SBS26).
4. Remove the 2 brake caliper guide pin bolts and the brake caliper.
^
To install, tighten to 61 Nm (45 lb-ft).
5. To install, reverse the removal procedure.
^
Bleed the brake caliper.