E 350 V8-5.4L (2008)
13. Back off the nut 90 degrees.
14. Tighten the nut.
^
Tighten to 24 Nm (18 lb-ft).
^
To verify that there is no side-to-side end play, attach a magnetically mounted dial indicator to the spindle end and place the dial indicator tip
on the outboard surface of the hub. Check for side-to-side end play.
^
Final bearing adjustment has zero end play. The maximum torque to rotate the hub is 2.3 Nm (20 lb-in) when end play is zero.
15. Install the axle shaft.
All vehicles
16. Reload the tension on the parking brake cable.