E 350 V8-5.4L (2008)
Removal
All engine support insulators
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. If servicing the RH engine support insulator, remove the starter motor. For additional information, refer to Starting System.
3. Remove the 2 bolts and position the cooling fan shroud onto the cooling fan.
4. Remove the 4 exhaust Y-pipe flange nuts.
5. Remove the 4 engine support insulator-to-engine support bracket nuts.
RH engine support insulator
6. Using a suitable jack positioned on the RH rear of the cylinder block, raise the engine 25.4 mm (1 in).
