E 350 V8-5.4L (2008)
4. Install and fully tighten the special tools on both camshafts.
5. CAUTION: If one or both of the tensioner mounting bolts are loosened or removed, the tensioner-sealing bead must be inspected for seal
integrity. If cracks, tears or separation from the tensioner body or permanent compression of the seal bead is observed, install a new
tensioner. Failure to follow these instructions may result in engine damage.
Remove the timing chain tensioning system from both timing chains.
1
Remove the bolts.
2
Remove the timing chain tensioners.
3
Remove the timing chain tensioner arms.
6. Remove the timing chains and crankshaft sprocket.
