E 350 V8-5.4L (2008)
21. Remove the bolts.
22. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These
tools cause scratches and gouges which make leak paths. Use a plastic scraping tool to clean sealing surfaces.
Remove the engine front cover from the front cover-to-cylinder block dowel.
^
Discard the engine front cover gasket.
^
Clean the mating surfaces with silicone gasket remover and metal surface prep. Follow the directions on the packaging.
^
Inspect the mating surfaces.