E 350 V8-5.4L (2008)
Midship fuel tanks
2. Disconnect the electrical connector, spring loaded clamp and the fuel vapor hoses and remove the fuel tank pressure (FTP) sensor.
Aft-of-axle fuel tanks
3. Disconnect the FTP sensor electrical connector.
4. Press down and rotate the fuel pressure sensor counterclockwise and remove from the fuel tank.
All vehicles
5. To install, reverse the removal procedure.
-
Carry out the evaporative emission system leak test. See: Emission Control Systems/Evaporative Emissions System/Testing and Inspection
-
Carry out the evaporative emission repair verification drive cycle.