E 350 V8-5.4L (2008)
10. Release the J-clip.
11. Release the pin-type retainer and position aside the inboard seat cushion flap.
All seats
12. NOTE: Power seat shown, manual similar.
Loosen the 4 seat track-to-cushion frame bolts and separate the seat track and pedestal from the seat cushion frame to allow removal of the safety
belt buckle switch electrical connector.
-
To install, tighten to 25 Nm (18 lb-ft).
13. Separate the electrical connector and wire harness pin-type retainers from the seat.
