E 350 V8-5.4L (2008)
2. NOTE: The manual shift lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor slots. The tool is designed to fit snug.
3. CAUTION: Tightening one screw before tightening the other may cause the digital TR sensor to bind or become damaged.
Tighten the digital TR sensor bolts.
^
Tighten to 9 Nm (80 lb-inch).
4. Install the manual control lever.
1) Position the manual control lever.
2) Install a new manual control lever outer nut.
^
Tighten to 33 Nm (24 lb-ft).