E 350 V8-5.4L (2008)
Alternator: Description and Operation
GENERATOR
The generator(s) is belt-driven by the engine accessory drive system. The generator has an internal voltage regulator that is replaced separately.
Single Generator
The single generator system consists of the generator mounted on the top right of the engine (diesel) or top center of the engine (gas).
The gas engines use a 115-amp generator with a 2.52:1 pulley ratio. An extra heavy-duty option is available for both the 5.4L and the 6.8L engines. It
includes a 135-amp generator with a 2.52:1 pulley ratio.
The diesel engine uses a 110-amp generator with a 2.79:1 pulley ratio.
An extra heavy-duty option is available that includes a 140-amp generator with a 2.52:1 pulley ratio. The standard and extra heavy-duty generators are
similar in appearance and use the same connectors, making them interchangeable. Identification between the different generators can be carried out by
referring to the generator part number and the master parts catalog.
In the single generator system, with the key in the ON position, voltage is supplied through the charging system warning indicator (in the instrument
cluster) through the I circuit to the voltage regulator. The regulator grounds this circuit and the charging system warning indicator is illuminated.
When the engine is started, the regulator removes the ground on this circuit and the charging system warning indicator turns off.
Dual Generator
The dual generator package consists of an upper/lower generator system (diesel only). The 6.0L upper generator is a 140-amp generator with a 2.79:1
pulley ratio. The 6.0L lower generator is a 120-amp generator with a 3.00:1 pulley ratio. The upper and lower generators are not interchangeable.
