E 350 V8-5.4L (2008)
2. Remove the 2 stabilizer link upper bolts, washers and nuts.
^
Discard the bolts and nuts.
^
To install, tighten to 70 Nm (52 lb-ft).
3. Remove the 2 stabilizer link lower nuts, washers and insulators.
^
Discard the nuts.
^
To install, tighten to 28 Nm (21 lb-ft).
4. Remove the 2 stabilizer bar links, washers and insulators.
5. Remove the 4 stabilizer bar bracket bolts, the 2 brackets and the stabilizer bar.
^
Discard the bolts.
^
To install, tighten to 40 Nm (30 lb-ft).
6. To install, reverse the removal procedure.
