E 350 V8-5.4L (2008)
Installation
1. Using the special tools 205-098, 205-100 and 205-278, install the inner and outer bearing cups.
^
Check to see if a 0.038 mm (0.0015 inch) feeler gauge can be inserted between the cups and the rear hub at any point around each cup. Reseat
the bearing cups, if necessary.
2. Using a suitable seal installer, install the inner rear wheel bearing in the rear hub.
3. Position the rear brake disc on the rear hub and install the 8 bolts.
^
Tighten to 104 Nm (77 lb-ft).
