E 350 V8-5.4L (2008)
8. NOTE: The transmission fluid pan gasket is reusable. Clean and inspect for damage. If not damaged, the transmission fluid pan gasket should be
reused.
Install the transmission fluid pan and gasket.
1) Position the transmission fluid pan with the gasket in place.
2) Install the bolts.
^
Tighten to 14 Nm (10 lb-ft).
9. CAUTION: The use of any other transmission fluid can result in the transmission failing to operate in a normal manner or transmission
failure.
Fill the transmission.
^
Add 4.7L (5 qt) of clean transmission fluid to the transmission through the transmission fluid filler tube.
10. Start the engine. Move the selector lever through all the gear ranges, checking for engagements.
11. With the engine running and the transmission at normal operating temperature 66 - 77° C (150 - 170° F), check and adjust the transmission fluid
level, and check for any leaks. If transmission fluid is needed, add transmission fluid in increments of 0.24L (0.5 pt) until the correct level is
achieved (transmission fluid should be in the cross-hatched area of the transmission fluid level indicator).
Transmission Fluid Drain and Refill - Automated Equipment
Transmission Fluid Drain and Refill - Automated Equipment
