E 350 V8-5.4L (2008)
Transmission Speed Sensor: Service and Repair
Turbine Shaft Speed (TSS) Sensor
4R70E/4R75E - Automatic Transaxle/Transmission
Turbine Shaft Speed (TSS) Sensor
Turbine Shaft Speed (TSS) Sensor
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the turbine shaft speed (TSS) sensor electrical connector.
3. Remove the TSS sensor bolt and sensor.
^
Remove the TSS sensor bolt.
^
Remove the TSS sensor.
4. To install, reverse the removal procedure.
^
Tighten bolt to 11 Nm (8 lb-ft).
