E 350 V8-5.4L (2008)
Shift Cable: Service and Repair
Selector Lever Cable and Bracket - 4R70E, 4R75E
Selector Lever Cable and Bracket - 4R70E, 4R75E
Selector Lever Cable and Bracket - 4R70E, 4R75E
Removal and Installation
CAUTION: To prevent selector lever cable damage, do not apply force to the selector lever cable assembly between the steering column shift
tube bracket and the steering column bracket.
1. Pull to release the retaining clips and remove the steering column opening lower finish panel.
2. Remove the steering column opening lower finish panel reinforcement.
1) Release the pin-type retainers and remove the electrical connector.
2) Remove the screw and data link connector (DLC).
