E 350 V8-6.0L DSL Turbo VIN P (2004)
4. Drive the caliper locking pin out of the caliper locking groove.
5. Repeat for the lower caliper locking pin.
6. CAUTION: Never allow the rear disc brake caliper to hang from the brake hose. Provide suitable support.
Tilt the rear disc brake caliper out of the support bracket.
7. Remove the brake pads from the rear disc brake caliper.
1
Pull the inboard brake pad out of the caliper pistons and out of the rear disc brake caliper.
2
Press the end of the outboard brake pad to clear the retention lugs and slide it up and out of the rear disc brake caliper.
Installation
1. Press the caliper pistons to the bottom of the caliper bores.