E 350 V8-6.0L DSL Turbo VIN P (2004)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic Control Unit-(HCU)
Removal and Installation
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.
1. Disconnect the battery.
2. Position the radiator coolant reservoir aside.
1
Remove the bolts.
3. NOTE: Do not disconnect the hose from the power steering pump reservoir.
Remove the bolts and position the power steering pump reservoir aside.
4. Disconnect the brake lines from the brake master cylinder.
