E 350 V8-6.0L DSL Turbo VIN P (2004)
5. Install the brake shoe hold-down springs.
6. Install the brake shoe retracting spring.
E-350
7. Install the front wheel hub assembly.
E-150, E-250
8. Use the special tool to measure the inside diameter of the drum portion of the rear brake disc.
9. Use the special tool to set the rear brake shoe and lining diameter to 0.5 mm (0.02 inch) less than the inside diameter of the drum portion of the
brake disc.
10. Install the brake disc.
11. NOTE: Only apply the parking brake one time.