E 350 V8-6.0L DSL Turbo VIN P (2004)
Vacuum Brake Booster: Service and Repair
Brake Booster-Vacuum
Removal and Installation
1. With the engine off, apply the brake pedal several times to deplete the brake booster vacuum reserve.
2. Remove the brake master cylinder.
3. Disconnect the brake booster check valve.
4. Disconnect the brake booster push rod.
1
Remove the stoplamp switch self-locking clip.
2
Remove the stoplamp switch.
3
Remove the brake booster push rod bushing.
4
Disconnect the brake booster push rod from the brake pedal pin.
5. Remove the brake booster nuts.