Service and Repair for Engine Block Heater on E 350 V8-60L Turbo Diesel Engine (2004)
Engine Block Heater: Service and Repair
Block Heater-6.0L Diesel
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain the cooling system.
3. Remove the engine cover.
4. Disconnect the block heater electrical connector.
5. Remove the block heater.
^
Remove and discard the O-ring seal.
6. To install, reverse the removal procedure.
^
Install a new O-ring seal.
