E 350 V8-6.0L DSL Turbo VIN P (2004)
Exhaust Manifold: Service and Repair
Exhaust Manifold RH
Exhaust Manifold RH
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the battery ground cable.
3. Remove the engine cover.
4. Prior to removing the exhaust manifold, inspect the exhaust manifold for warpage with a feeler gauge between the manifold and the cylinder head.
Record the measurement and compare with the specifications.
5. Remove the RH bolts for the turbocharger adapter pipe.
6. NOTE: Top bolts shown, bottom bolts similar.
Remove the bolts and the RH exhaust manifold.
Installation
1. NOTE: Start installing the bolts with the second bolt from the rear on the top. The hole diameter is smaller, therefore allowing alignment of the
remaining bolts.
NOTE: Apply anti-seize lubricant to the bolt threads prior to installing the bolts.
Install the RH exhaust manifold and bolts. Tighten the bolts in the sequence shown.