E 350 V8-6.0L DSL Turbo VIN P (2004)
Blower Motor Resistor: Description and Operation
BLOWER SWITCH RESISTOR
Blower Motor Resistor Thermal Limiter
The blower motor resistor has the following features:
-
The assembly is located on the passenger side of the vehicle on the evaporator housing.
-
Three resistance elements are mounted on the resistor board to provide four blower motor speeds.
-
Depending on the blower switch position, series resistance is added or bypassed in the blower motor circuit to decrease or increase blower motor
speed.
-
An overheating protective device (thermal limiter) will open the resistor coil circuit when the temperature reaches 121°C (250°F) interrupting the
blower motor operation in all speeds except HI.
-
The thermal limiter cannot be reset and is not serviceable.