E 350 Heating and AC Control Assembly Diagram - Page 7981
Control Assembly: Description and Operation
CLIMATE CONTROL ASSEMBLY
The climate control assembly has three system controls:
-
The function selector switch combines a vacuum selector valve with two electrical switches to supply battery positive voltage to the A/C clutch
circuit (if equipped with A/C) and the blower motor control circuit.
-
The temperature selection is accomplished with a potentiometer connected to the electric temperature blend door actuator that controls positioning
of the temperature blend door. Movement of the control knob from COOL (Blue) to WARM (Red) causes a corresponding movement on the air
temperature control door and determines the temperature that the system will maintain.
-
The blower motor switch controls blower motor speed by adding or bypassing resistors in the heater blower motor switch resistor.
