E 350 V8-6.0L DSL Turbo VIN P (2004)
Liquid Vapor Separator: Service and Repair
FUEL VAPOR VENT VALVE
REMOVAL
1. Remove the fuel tank.
2. CAUTION: The fuel vapor vent valve must be disengaged from the fuel tank before it can be removed. While pressing down, rotate the
fuel vapor vent valve counterclockwise to disengage from the fuel tank. Failure to do so can cause damage to the fuel vapor vent valve or
the fuel tank.
Remove the fuel vapor vent valve.
1
Disconnect the evaporative emission (EVAP) canister tube.
2
Press down and rotate the fuel vapor vent valve counterclockwise and remove from the fuel tank.
INSTALLATION
1. To install, reverse the removal procedure.
-
Carry out the evaporative emission system leak test. See: Testing and Inspection/Component Tests and General Diagnostics/Evaporative
Emission System Leak Test
-
Carry out the evaporative emission repair verification drive cycle. See: Testing and Inspection/Component Tests and General
Diagnostics/Evaporative Emission Repair Verification Drive Cycle
