E 350 V8-6.0L DSL Turbo VIN P (2004)
EGR Electronic Vacuum Regulator Solenoid: Service and Repair
EXHAUST GAS RECIRCULATION (EGR) VACUUM REGULATOR SOLENOID
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the engine cover.
3. Remove the exhaust gas recirculation (EGR) vacuum regulator solenoid.
1
Disconnect the electrical connector.
2
Disconnect the vacuum lines.
3
Remove the bolts (nuts if applicable).
INSTALLATION
1. To install, reverse the removal procedure.
