Fuel Injector Seat Adapter for E 350 V8-60L DSL Turbo VIN P (2004)
-
Tighten to 13 Nm (115 lb-in).
9. Apply clean engine oil to the D-ring seals and reassemble the crankcase-to-head tube if necessary. Install the crankcase-to-head tube(s).
-
Tighten to 82 Nm (60 lb-ft).
10. If removed, install the RH valve cover, 5 bolts and 6 stud bolts.
-
Tighten to 13 Nm (115 lb-in).
11. Remove the engine from the Car/Truck Engine Stand.
12. Install the engine in the vehicle.