Recall for engine control module calibration on E 350 V8-60L diesel turbo VIN P (2004)
MODULE RECALIBRATION
NOTE:
This recalibration, using WDS software Version B40.7 or higher, or B41.1 or higher, will update the PCM, TCM and FICM. This new calibration is
not included in the B41 CD. Calibration files may also be obtained at the website.
1.
Connect a battery charger to the vehicle.
2.
Using Worldwide Diagnostic System (WDS), recalibrate the modules to the latest level calibration.
3.
VERIFY THE WDS IS LOADED WITH SOFTWARE VERSION B40.7 OR HIGHER, ORB41.1 OR HIGHER.
4.
Select Module Configuration Programming (MCP) and follow the WDS display instructions.
^
If unable to recalibrate the modules:
