E 350 V8-6.0L DSL Turbo VIN P (2004)
3. Use the Safety Belt Bolt Torx Bit to remove the RH rear safety belt and buckle bolt.
4. Remove the RH rear safety belt buckle and tongue assembly.
INSTALLATION
1. NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten bolts to specification.
To install, reverse the removal procedure.
-
Check the active restraint system for correct operation.
Safety Belt - Rear 4-Passenger Bench Seat
SAFETY BELT - REAR 4-PASSENGER BENCH SEAT
Torx Bit, Safety Belt Bolt