Service and Repair of Dual Generator for E 350 V8-60L DSL Turbo VIN P (2004)
Alternator: Service and Repair
Dual Generator
GENERATOR - DUAL GENERATOR
NOTE: This procedure applies to the secondary generator of the dual generator system.
1. Disconnect the dual batteries.
2. Position the cowl wire harness aside.
1
Remove the bolt and position the manifold absolute pressure (MAP) sensor aside.
2
Remove the bolt and position the ground strap aside.
3
Remove the 2 bolts and position the power steering fluid reservoir aside.
4
Remove the 3 bolts and position the cowl wire harness aside.
3. Remove the 3 bolts, 2 nuts and the intercooler tube bracket.
4. Loosen the 2 clamps and remove the intercooler tube.
