E 350 V8-6.0L DSL Turbo VIN P (2004)
Radius Arm: Service and Repair
Radius Arm
Removal and Installation
1. Remove the front coil spring.
2. Remove the spring insulator.
1
Remove the radius arm-to-axle nut and bolt.
2
Remove the spring retainer and insulator.
3. Remove the radius arm.
1
Remove the nut.
2
Remove the washer and rear insulator.
3
Pull the radius arm from the bracket, and remove the spacer, insulator and washer.
4. NOTE: Inspect the bushings and install new as necessary.
To install, reverse the removal procedure.