E 350 V8-6.0L DSL Turbo VIN P (2004)
Parking Pawl: Service and Repair
TorqShift Automatic Transmission
Park System
Special Tool(s)
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the rear driveshaft.
Vehicles equipped with a transmission-mounted parking brake
3. Disconnect the transmission-mounted parking brake linkage.
1. Disconnect the return spring from the pin.
2. Remove the hair pin retaining clip from the pin.
3. Remove the pin from the actuating lever and move the actuating cable away from the actuating lever.
4. Compress the spring on the actuating cable and remove the cable out of the cable housing.
4. Remove the transmission-mounted parking brake.
1. Remove the transmission-mounted parking retaining bolts.
2. Keeping the vent in an upward position, remove the transmission-mounted parking brake assembly.
3. Remove and discard the transmission-mounted parking brake gasket.
Vehicles equipped with a fixed yoke