E 350 V8-6.0L DSL Turbo VIN P (2004)
18.
For non-PTO applications, install the overdrive pressure plate with the notches facing up. See Figure 65.
19.
For vehicles equipped with a PTO, install the overdrive pressure plate. See Figure 66.
1)
Install the larger tab positioned at the top of the case.
2)
Install the square end of the plate in the bottom of the case.
^
The P10 pressure plate anti-rotation tab is installed into the 6 o'clock position of the snap ring.
20.
Install the overdrive clutch. See Figure 67.
^
Start with a friction plate, alternating with a steel plate.