E 350 V8-6.0L DSL Turbo VIN P (2004)
14. Remove the solenoid screen assembly by rotating and pulling it.
15. CAUTION: The steel electronic pressure control (EPC) check ball is spring-loaded under the valve body separator plate.
If replacing the valve body separator plate, remove the bolts and the separating plate reinforcing plate.
16. Lower the valve body separator plate and the gaskets carefully, to retain the rubber check balls and the steel EPC check ball and spring assembly.
Installation
CAUTION: Using the incorrect gasket can cause damage to the transmission.
All vehicles
1. NOTE: If the valve body separator plate was not removed, proceed to Step 6.