E 350 1 Ton Van V10-6.8L VIN S (1997)
Caliper Bolts
7. Remove the two caliper bolts.
CAUTION: If the front brake hose is not disconnected, do not allow the disc brake caliper to hang from the front brake hose. Use wire to support
the disc brake caliper from a convenient underbody component.
Disc Brake Caliper
8. Remove the disc brake caliper from the front disc brake caliper anchor plate.
INSTALLATION
1. If installing new brake shoes and linings, use a C-clamp and a brake pad to press the caliper piston to the bottom of the caliper bore.
NOTE: Bottoming of the caliper piston is not necessary if reusing the original brake pads.
