E 350 1 Ton Van V10-6.8L VIN S (1997)
Electronic Hydraulic Control Unit (EHCU), Installation
INSTALLATION
Follow the removal procedure in reverse order, noting the following.
^
On vehicles equipped with dual batteries (refer to Strating and Charging).
^
When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module
(PCM) relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
^
Bleed the EHCU after installation. See: Brake Bleeding/Service and Repair
