E 350 1 Ton Van V10-6.8L VIN S (1997)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
REMOVAL
1. Remove the engine cooling fan and fan shroud.
2. Remove the drive belt.
3. Raise the vehicle on a hoist.
4. Remove the crankshaft pulley bolt.
5. Using the Crankshaft Damper Remover, remove the crankshaft pulley.
6. Using the (A) Front Cover Seal Remover, remove the (B) crankshaft front seal.
INSTALLATION
1. Lubricate the (A) engine front cover and the (B)crankshaft front seal inner lip.
^
Use engine oil meeting Ford specification WSE-M2C908-A1.
