E 350 1 Ton Van V10-6.8L VIN S (1997)
23. Apply a bead of silicone along the head-to-block surface and the oil pan-to-block surface.
^
Use Silicone Gasket and Sealant F6AZ-19562-A or equivalent meeting Ford specification WSE-M4G323-A6.
NOTE: The timing chain is not shown for clarity. If not secured within 4 minutes, sealant must be removed and the sealing area cleaned with
solvent. Allow to dry until there is no sign of wetness, or 4 minutes, whichever is longer. Failure to follow this procedure can cause future oil
leakage.
24. Install a new engine front cover gasket on the engine front cover, then position the engine front cover on the front cover-to-cylinder block dowels.
25. Loosely install the engine front cover fasteners.
