E 350 1 Ton Van V10-6.8L VIN S (1997)
29. Install the power steering bolts.
30. Lower the vehicle.
31. Install the water pump.
32. Connect the CMP electrical connector.
33. Raise and support the vehicle.
34. Install a new crankshaft front seal and the crankshaft pulley.
35. Lower the vehicle.
36. Install the cam covers.
37. Install the radiator and fill the cooling system.
38. Install the engine air cleaner (ACL) and the air cleaner outlet tube.
39. Reconnect the battery ground cable.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control
module relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
40. Fill the engine with oil.
^
Use engine oil meeting Ford specification WSE-M2C903-A 1.
