E 350 1 Ton Van V10-6.8L VIN S (1997)
4. Remove the pulley snap ring.
5. Remove the A/C clutch pulley and A/C compressor pulley bearing.
6. Remove the A/C clutch field coil.
a. Position the Shaft Protector on the nose opening of the compressor.
b. Use the (A) Differential Side Bearing Puller to remove the (B) field coil.
CAUTION: Do not use air tools.
INSTALLATION
1. Clean the A/C clutch field coil mounting surface head.
2. Use the (A) Field Coil Replacer, (B) Coil Pressing Tool and (C) 2-Jaw Puller to install the (D) A/C clutch field coil.
NOTE: Check that the A/C clutch field coil outer diameter bottoms completely against the head. Make sure the coil electrical connector is
correctly positioned.
