E 350 1 Ton Van V10-6.8L VIN S (1997)
4. Install the two A/C condenser mounting brackets.
a. Install the A/C condenser mounting bracket.
b. Install the screw.
5. Position the radiator.
6. Install the two upper radiator mounting brackets.
a. Install the upper radiator mounting bracket.
b. Install the screws.
7. Install the condenser core refrigerant lines.
a. Install new green O-rings.
^
Lubricate with clean Motorcraft YN-12b refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B.
NOTE: The green O-ring(s) cannot be seen. They are located in the connection(s).
b. Connect the condenser to evaporator tube.
c. Connect the compressor discharge line.
NOTE: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
