E 350 1 Ton Van V10-6.8L VIN S (1997)
Evaporator Core: Service and Repair
Evaporator Core
REMOVAL
1. Recover the refrigerant.
NOTE: Cap or plug all open refrigerant line fittings to prevent entry of dirt and moisture.
2. Remove the battery.
WARNING: TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE INJURY, THE AIR BAG SYSTEM BACKUP POWER
SUPPLY MUST BE DEPLETED BEFORE REPAIRING ANY CLIMATE CONTROL COMPONENTS. TO DEPLETE THE BACKUP
POWER SUPPLY, DISCONNECT THE BATTERY TO STARTER CABLE AND WAIT ONE MINUTE.
3. Remove the battery tray.
a. Remove the screws.
b. Remove the battery tray.
4. Move the oil fill pipe out of the way.
a. Remove the screw.
b. Move the oil fill pipe.
5. Move the windshield washer reservoir cover out of the way.
a. Remove the screws.
b. Move the windshield washer reservoir cover.
