E 350 1 Ton Van V10-6.8L VIN S (1997)
1. Remove the floor/defrost door vacuum control motor.
a. Disconnect vacuum lines.
b. Remove the screws.
c. Lift the vacuum control motor off the door crank.
d. Remove the vacuum control motor.
2. Remove the floor/panel door vacuum control motor.
a. Disconnect the vacuum line.
b. Remove the screws.
c. Lift the vacuum control motor off the door crank.
d. Remove the vacuum control motor.
3. Remove the vacuum lines.
ASSEMBLY
1. Follow the disassembly procedure in reverse order.
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control
Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
