E 350 1 Ton Van V10-6.8L VIN S (1997)
Throttle Body: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
2. Remove the engine cover.
3. Remove the engine air cleaner assembly, air cleaner outlet tube and accelerator cable splash shield.
4. Disconnect the throttle body control linkage by disconnecting the (A) accelerator cable, the (B) speed control actuator cable and the (C) throttle
control return spring.
5. Remove (A) three bolts retaining the (B) accelerator cable bracket to the throttle body. Remove the throttle return spring from the (C) throttle bell
crank. Remove the accelerator cable bracket.
6. Disconnect the Throttle Position Sensor (TP) connector.