E 350 1 Ton Van V10-6.8L VIN S (1997)
Technical Service Bulletin # 97T02
Date: 970701
Campaign - Powertrain Control Module Reprogramming
97T02
SPECIAL SERVICE INSTRUCTION
Special Service Instruction - Reprogramming Powertrain Control Module Calibration Codes on Certain 1997 Econolines
Dealer Letter
Special Service Action Information
Attachment I
^
Administrative Information
^
Labor Allowances
Attachment II
^
Technical Instructions
Customer Notification Letter not Applicable
Attachment I - Administrative/Labor Information
OASIS
You must use OASIS to determine if a vehicle is covered by this Special Service Instruction.
Promptly Correct (Within applicable emissions warranty time and mileage only)
^
Affected vehicles at your dealership.
^
Other eligible vehicles which are brought to your dealership.
Claims
Enter claims using DWE. See ACESII Manual, Sections 5 & 6.
Labor Allowances
Operation Description
Labor Time
Labor Operation
Check Powertrain Control
0.2 Hrs.
SSI02A
Module Calibration Level and
Return Truck to Owner
Reprogram Powertrain Control
0.3 Hrs.
SSI02B
Module to Acceptable
Calibration Level
Parts Ordering information
No parts are required for this program.
Claims Preparation
-- Enter using DWE, Warranty Claim Screen.
-- Use code information as shown:
^
Program Code - 97T02
^
Causal Component - RECALEM
^
Condition Code - 42
^
Labor Operation - See Above
See Sections 5 & 6 of the ACESII manual for detailed instructions.
Attachment II - Technical Instructions
These Special Service Instructions are only for vehicles still within applicable emissions warranty coverage.
If the vehicle is outside the emissions warranty time or mileage limits, do not perform Special Service Instruction 97T02.
Warranty claims under this Special Service Instruction will only be accepted for inspecting the vehicle's calibration level and, if necessary,
