E 350 1 Ton Van V10-6.8L VIN S (1997)
4. Remove the belt and buckle assembly pretensioner.
1
Disconnect the belt and buckle assembly pretensioner harness connector.
2
Using the Safety Belt Bolt Bit, remove the belt and buckle assembly pretensioner retaining bolt.
3
Remove the belt and buckle assembly pretensioner.
INSTALLATION
1. Follow the removal procedure in reverse order.
-
Align both anti-rotation tabs on the belt and buckle assembly pretensioner into the seat track prior to tightening the bolt.
NOTE: Make sure to tighten bolts to specification.
2. Reconnect negative battery ground cable.
On vehicles equipped with dual batteries:
-
Reconnect the auxiliary battery frame ground.
-
Reconnect the primary battery ground cable.