E 350 1 Ton Van V10-6.8L VIN S (1997)
Clutch: Service and Repair
Direct Clutch
Center Support
DISASSEMBLY
1. Using the (A) O-Ring Tool, remove and discard the (B) direct clutch seal rings. Remove the (C) No. 6 center support thrust washer.
2. Inspect the following for contamination or damage. Clean or replace, as necessary.
-
No. 6 center support thrust washer (A) seal ring grooves (B) inner hub diameter (C) outer hub diameter (D) feedbolt threads (E) ball bearing
(F)
ASSEMBLY
1. Follow the removal procedure in reverse order.
-
Lightly lubricate the thrust washer with petroleum jelly to hold it in place during assembly.
-
Install new seals.
Direct Clutch Assembly and Intermediate Brake Drum