E 350 1 Ton Van V10-6.8L VIN S (1997)
Flex Plate: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the transmission.
NOTE: It is not necessary to remove the transmission from the jack.
3. Remove the flywheel bolts and the flywheel.
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control
module relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
