E 350 Van L6-300 4.9L VIN E 1-bbl (1982)
Figure 8
1.
If equipped with an EEC IV system module in front of blower housing, remove the module cover and dash flange attaching screws and lay the
module aside. (Figure 8)
2.
Remove the blower motor and resistor connections from the blower scroll cover. (Figure 8)
3.
Remove blower scroll cover (7 screws) and blower motor (4 screws) from the blower housing (push/ pull blower motor wire grommet toward
inside of evaporator housing). (Figure 8)
