E 350 Van L6-300 4.9L VIN E 1-bbl (1982)
Axle Shaft: Service and Repair
Ford Integral Carrier Type Axle
1.
Raise and support vehicle, then remove rear wheel and brake drum.
2.
Loosen rear housing cover screws and allow lubricant to drain, then remove cover.
3.
Remove differential pinion shaft lock bolt and differential pinion shaft.
4.
Move flanged end of axle shaft inward and remove C-lock from end of shaft.
5.
Remove axle shaft from housing by pulling outward.
6.
Reverse procedure to install. Apply Loctite EOAZ-19554-B to pinion shaft lock bolt threads, then torque lock bolt to 15-30 ft. lbs.