E 350 Van V8-460 7.5L VIN L 4-BBL (1987)
Fig. 15 - A/C Vacuum Motor Installation.
4. Remove pushnut, vacuum motor arm and washer from the outside-recirculated door shaft (Fig. 15, view X).
5. Remove control cable from bracket (one screw) and slide it over bracket. Remove cable clip from blend door shaft.
6. Remove A/C blower motor housing (eleven screws).
7. Remove the blend door.
8. Remove the heater hoses from the heater core and plug the hoses.
9. Remove the two heater core retaining brackets (two screws).
10. Remove the heater core and seal assembly.
INSTALLATION