E 350 Van V8-460 7.5L VIN L 4-BBL (1987)
POWER STEERING COOLER KIT INSTALLATION
1.
Mount the power steering cooler on the left side of the radiator support using the "U" clip nuts and screws provided in the kit, Figure 1.
2.
The low pressure fluid from the return line is routed from the steering gear, through the cooler and back to the power steering pump reservoir.
3.
Discard the rubber portion of the return line.
4.
Route a new piece of hose (provided in the kit) from the bottom nipple of the cooler to the metal tube of the return line which is still connected to
the gear.
a.
Cut to proper length.
b.
Secure the hose with the hose clamps provided.
5.
Route a hose from the top nipple of the cooler to the nipple on the power steering reservoir. Clamp the hose securely at both ends.
